Descriptions：

1. Find and prevent abnormalities in advance and handle quickly to prevent defective products from flowing into the next process, and ensure the quality in process
2. Check and supervise defective products’ impact on product quality during the manufacturing process, carry out patrol inspection on time, and pay attention to special processes or stations that would easily cause accidents.
3. Implement emergency measures after abnormal conditions happened, isolate defective products, follow up and carry out corrective and preventive measures, and track abnormal cases to the closed loop.
4. Supervise the implementation of inspection at each station and suggest on inspection standards
5. Manage process changes and monitor the implementation of changes
6. Update the inspection documents regularly, as well as train and assess the inspectors.
7. Check the authenticity of inspection data
8. Responsible to propose penalty on the operation behavior which violate the requirements of the process instruction, suggest and understand the changes in production process
9. Responsible for making specific improvements on various quality issues

Qualifications：

1. More than 3 years of working experience
2. Familiar with semiconductor knowledge, led process experience is preferred
3. Semiconductor chip and packaging process knowledge
4. Proficient in quality tools, such as APQP, PPAP, FMEA, SPC, MSA and can use them in practice
5. Master the knowledge and application of quality analysis methods such as 8D
6. PQE experience in semiconductor industry is preferred
7. Strong internal and external communication and cooperation abilities
8. Be able to independently coordinate with internal and external departments to complete the analysis and settlement of customer complaints, able to draw 8D report, and sustain the case with conclusion
9. Positive and serious working attitude, excellent communication and coordination abilities strong psychological ability and teamwork awareness
10. English ability: CET4 or above, good reading and writing skills is preferred
11. Strong logical thinking ability and can work under pressure
12. Proficient in office software

Descriptions：

1. Provide technology related pre-sales and after-sales service for product customer
2. Responsible for customer complaint and RMA product failure analysis, customer information maintenance and update, tracking to the end of project
3. Track and handle customer's dissatisfactions and complaints, reply to 8D reports, find out the true causes with relevant departments to prevent complaints occurrence, and promote continuous improvement on difficult and important cases
4. Work with customers to solve problems during the application process
5. Organize and coordinate internal and external communication on quality information as an internal and external communication bridge, and solve the demands of both parties
6. Response to customer's site visit requirements and accompany them on site
7. Assist marketing and sales departments to develop and maintain customer relationship

Qualifications：

1. Bachelor degree or above, strong internal and external communication and cooperation skills
2. Independently coordinate with internal and external departments to complete the analysis and handling of customer's complaints, finally provide the 8D report to customer and track to the end of the case
3. According to customer's requirements, carry out specific improvement by coordinating internal and external resources
4. Be able to adapt to low-frequency business trip, strong psychological capability and teamwork awareness
5. English ability: CET4 or above, good reading and writing skills, fluent oral English is preferred

Descriptions：

1. Ensure the quality of raw materials provided by the suppliers, and regularly feed back the problems to suppliers about the materials' quality defects and require them to make improvement
2. Track and confirm the supplier's improvement report and implementation effect, and implement on-site audit, inspection and coaching if necessary
3. Formulate the inspection specification and inspection plan of the incoming inspection department, and provide training and guidance timely to the inspectors
4. Participate in the evaluation and release of suppliers’ initial samples
5. Perform statistical score quarterly according to current supplier's quality status, and make improvement requests to low scored suppliers within a definite time
6. Develop and audit new suppliers, assess and score new suppliers together with the procurement and R & D departments
7. Formulate and implement annual supplier audit plan
8. Set supplier's quality goals, and promote the continuous improvement of suppliers to achieve quality goals
9. Be responsible for the compensation caused by supplier's quality problems

Qualifications：

1. More than 3 years of working experience, familiar with LED manufacturing process is preferred
2. SQE, QE and engineering experiences in semiconductor industry is preferred
3. Proficient in quality tools, such as APQP, PPAP, FMEA, SPC, MSA, and can use them in practice
4. Master the knowledge and application of quality analysis techniques such as 8D
5. Strong internal and external communication and cooperation abilities
6. Familiar with ISO9001/ QC080000/ISO14001/TS16949 quality management system, with independent internal audit, supplier audit and external audit experience; Able to adapt to the requirements of frequent business trips, good psychological endurance and teamwork awareness
7. English ability: CET4 or above, good reading and writing skills

Descriptions：

1. Responsible for the development of related packaging process, including the evaluation of new materials and mass production introduction
2. Introduction of new process and improvement of yield
3. Establish and improve process specifications and standard processes
4. Continuous improvement to enhance product quality and output
5. Failure analysis and corresponding plan of related process

Qualifications：

1. Bachelor degree or above
2. 3 years of relevant industry experience, such as semiconductor, Led and LCD display industry
3. Familiar with relevant packaging process, and have some quality control experience of production line, strong sense of responsibility and good communication ability

Descriptions：

1. Participate in technical discussion, propose solutions and evaluate its feasibility aimed at technology problems
2. Be able to independently formulate new process experimental plan, analyze experimental results and draw conclusions
3. Participate in equipment process parameter testing, abnormal analysis, yield improvement, etc.
4. Analyze and improve the abnormal process of the station to ensure the normal operation of the production line
5. Assist other departments to complete the process testing and verification of the station and put forward reasonable suggestions
6. Fully evaluate the project plan and promote the project progress
7. Evaluate，check and accept the machines of station
8. Assist in the query of yield and loss, and put forward improvement plans targeted on them

Qualifications：

1. Bachelor degree or above, relevant science and engineering majors, such as microelectronics, physics, materials, chemistry, electronics, etc.
2. Familiar with semiconductor process flow, such as coating film, etching, yellow light, cleaning, defect inspection, etc. , with background knowledge in semiconductor physics, process device or integrated circuit design, etc.
3. Familiar with process flow monitoring, process quality control, SPC control, process maintenance, document formulation, personnel training, etc.
4. Solid foundation on DOE principle knowledge, test design, test implementation and follow-up, result analysis, technology transfer and production introduction
5. Strong logical analysis and execution abilities
6. Able to work under high pressure and flexible response to emergencies

Descriptions：

1. Responsible for MOCVD quaternary compound, AlGaInP epitaxial product development, epitaxial material structure design, and epitaxial material quality analysis
2. Communicate with customers, offer engineering support and solve relevant technical problems
3. In charge of R & D project proposal, mass production and EOL planning
4. Assist in handling abnormal customer complaints of the Engineering Department

Qualifications：

1. Bachelor degree or above, optoelectronics, materials, microelectronics or relevant majors.
2. Solid semiconductor devices knowledge
3. Good communication and expression abilities, conscientious and responsible working attitude, and strong execution ability